7 Headset Testing Benchmarks You Should Use


Headset testing will help you get the right set of headsets to meet your needs. Testing a headset is fairly straightforward nowadays. Optimization test files for headsets and earpieces are accessible online and can be used to test any form of headsets and earpieces. These files use specially engineered sounds to test the headsets’ distinct abilities. With any of these test files, you should understand what you’re trying to do, and you can use the results of the test to understand where your headset lies.

  • Checking for Frequency Response

This will help measure the headsets’ bass extension. Playing this and progressively you can hear a booming sound rising continuously. You’re going to hear a voiceover about the frequency as it increases. For the earpieces or headsets, you are checking, this frequency is the smallest possible frequency. At least 20 Hz, which is the least potential frequency that we humans can hear, should be a decent pair of headsets.

For frequency checking, there will be two kinds of files. The bass is tested by one and the other attempts the treble expansion. This second test is designed to measure the maximum possible frequency of your headsets. You can hear sweeping high-pitched tones. The upper bound of hearing is 20 KHz for people and this is what a decent headset can provide. It could be likely that something is off with your sound card if you hear odd ups and downs.

  • Standard Testing

Whenever there is deep or loud bass, most low-quality headsets tend to rattle. Drivers would be shaken by the Bass Shaker log. These tests shall be carried out at the highest volume and, at all wavelengths, you should hear the pounding sound loudly and clearly. Any buzz means that your headsets have degraded in quality. It could be in either one or both ear buds. This is how an old headset can still be checked to see if it still works as well as it did on first day

  • Dynamic Spectrum

This is the proportion of the headsets between the highest and the softest signal that can be detected. In fact, it is not specified in the requirements of the headsets, but it is a better functions measure to understand the isolation that your headsets can provide in a loud environment.

First of all, this test document will play the full noise and you have to change your headsets appropriately so that you don’t get too noisy. You will be told by the voiceover the hz of the tone being played. It will progressively go down and when the voice can be scarcely heard, the range stops at the level. There would be larger maximum range of head phones as they have more insulation than other forms of headsets.

  • Matching of the Driver

A decent headset would have less differences in the frequency response of its drivers. the audible range, the right and left drivers should respond identically to each frequency. The progress of this test signifies that your drivers are suited. The test reproduces various frequencies of up to ten KHz and deflects the same levels to both sides. The sound should have a key role, that is, it should play right in the center of your brain. Pay close attention. No exceptions should be made on either side. Switch the ear plugs if you want to make sure that it is the fault of the drivers and not your ears (as certain individuals have unstable hearing capacity in their ears).

If the variability you encountered earlier moves to the other hand, congratulations, your listening is perfect and the drivers of your headsets are only badly matched.

  • Cables Testing

It is the headset wiring that deflects the left channel to the left-hand side and the right channel to the headset’s right-hand side. The drivers’ polarity is preserved by the wire. The left and right channel tests will determine the channeling capacity of the wire.

Using the Main and Skewed test audio, the magnetism can be tested. The conductivity is maintained if you sense the sound in a powerful place between your ears. The warped audio, on the other hand, should be hard to find. If the outcomes are opposite, the wire polarity of your headsets is faulty. This may be a product of the novice repair of the wires of the four drivers. This is prevalent in falsified headsets.

  • Flatness of the Spectral

Without any falls or spikes, headsets can continuously generate all the frequency between the specified range. That does not mean that utter flatness is what we want. The hearing of most people is not flawless and those who follow your hearing curve will be the best headsets. They should feel plain in your ears, however. We can calculate frequency responses with special testing equipment and sinus sweeps. For frequencies around 1-3 KHz, humans do not determine flatness. You need a special sort of sweep for that. The Spectral Flatness Auditory Sweep test uses an inverse curve of sensitivity that makes the sound neutral.

Reduce your computer’s volume before doing this check. The headsets are ideally suited to your ears if you hear the waves distinctly at your threshold of hearing. And if you think your hearing is fine, the headsets will have a flat frequency response. If the sounds of this test file cease or turn too noisy, it means you have an issue with your hearing in your headsets or in certain situations. This method can also be used to test the effect on your ears of the intensity of your earpiece’s ear buds. Depending on this depth, you will find the frequency will alter. To get the narrowest frequency, you can decide how deep you can place in the ear buds.


Yeah, it’s pretty straightforward and easy. For these test files, just check online. For all these tests, you can measure your headsets or any one in specific. You can watch it on the page directly or stream it. Insert in your headsets and follow the instructions to better understand the outcome. If you are buying and want to test various headsets, download these test files and place them on an USB and take them with you. Before you get the great one that passes all the checks, try these with various headsets.

  • Advantages of Testing Your Headsets

You can get headsets of high quality that are sufficient for your ears. You can be sure that your hearing will not be impaired by the headsets. If your old headsets begin to sound aberrant and you’re not sure where the fault is, you can use these tests to find and cure the error. Some headsets are extremely pricey, and first checking them to see if they are really worth the investment can be helpful. You can also tell if something is wrong with your hearing.


It’s a great practice to test your headsets, particularly when you make a lot of money. These basic tests will help to understand the service and make the correct choice eventually. You can also patch your old headsets with the aid of these checks. Such files are free to use and can be downloaded easily. Unquestionably, with a choice of songs, you should try out the headsets. Go ahead with the purchase if you like the sound and it is simple and well composed.

Leave a Comment